| 翻訳と辞書 |
FFA P-16
The FFA P-16 was a Swiss prototype ground attack jet fighter designed in the 1950s by Flug- und Fahrzeugwerke AG to replace the piston-engined types then in service with the Swiss Air Force. It was Switzerland's second attempt to develop a domestically-designed and manufactured jet fighter after the EFW N-20, but the project was terminated in favor of the British-build Hawker Hunter before it could be introduced into service.
==Design and development==
The P-16 was designed to be especially well-suited to the close-support role, and short-field performance was also emphasized.〔''Flight'' p152〕 The resulting aircraft was a single-seat, single-engine design with intakes on the fuselage sides and a low wing. The horizontal stabilizer was mounted halfway up the fin. To ensure good performance from unprepared fields, heavy undercarriage and dual wheels and tires were fitted. The straight, low aspect ratio wing was of multi-spar construction with various high-lift devices including full-span Krueger flaps on the leading edge, large Fowler-type flaps on the inboard trailing edge, and ailerons which also operated as flaps. These devices allowed the aircraft to take off and land within 1,000 ft (330 m) at high altitude, allowing it to operate from the Alpine valleys characteristic of Switzerland.
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「FFA P-16」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|